Advertisement
Table of Contents
INSTALL INSTRUCTIONS C-PED SERIES
SILVER BILLET™ TELESCOPING COMPUTER MOUNTS
C-PED1612-W2 Silver Billet Telescoping Computer Pedestal with 2" Offset Bracket
C-PED1612-W4 Silver Billet Telescoping Computer Pedestal with 4" Offset Bracket
TOOLS REQUIRED:
Ratcheting wrench
Socket set
Powered drill
HARDWARE:
QTY
DESCRIPTION
1
White Teflon washer
7
¼-20 x ¾" Phillips machine screw
3
¼-20 Thin Nylock nut
7
¼" Flat washer
4
¼" Lock washer
4
5/16" x 1" Hex head lag bolt
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
(C-PED1612-W2 or C-PED1612-W4)
Always
Drill bit set
Screwdriver set
Standard Allen key set
PART #
CM93081
GSM33124
GSM30016-1
GSM31005
GSM31026
GSM34203
!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Havis-Shields Silver Billet Telescoping Computer Mounts C-PED Series
Summary of Contents for Havis-Shields Silver Billet Telescoping Computer Mounts C-PED Series
- Page 1 ¼” Flat washer ¼” Lock washer 5/16” x 1” Hex head lag bolt Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit...
- Page 2 Adjust lever Optional Mounting Base C-PED-PLT shown (Mounts to floor) 1. SUBASSEMBLY: • Determine location in vehicle where you can obtain a side and floor mount. • Be sure that determined locations would accept mounting bolts and screws without interference to other controls, wires, etc. 2.
Need help?
Do you have a question about the Silver Billet Telescoping Computer Mounts C-PED Series and is the answer not in the manual?
Questions and answers