Infrared Fireplace Heater OWNERS INSTALLATION AND OPERATING MANUAL Model: LS2002FRP13 Safety Notice Please read this entire Installation and Operating Manual BEFORE installing and using your new Infrared Fireplace Heater. Failure to fully understand and follow instructions may result in property damage, bodily injury, or even death.
Describe the issue and symptoms you have for, and about the product. A certified LIFESMART Technical Support agent will give you an evaluation of your issue and your resolution options. If the answer is not available at that time, you will be referred to the appropriate channels, or given a call/e-mail back within 72 hours with an answer or resolution.
INTRODUCTION Thank you for choosing one of the best Infrared absorption fireplace heaters available in the market today. By using this infrared fireplace heater you can efficiently heat up to 1500 square feet! You can even turn down the main thermostat in your home and let this heater carry some of the home heating duty.
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THE HEATER WARNING ! POTENTIAL FOR ELECTRICAL HAZARD! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1.
Page 6
15. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or re-locatable power tap (outlet/power strip). This heater has a self – protection function. If the heater does not operate normally, check cord and heater placement, then UNPLUG IT FROM THE OUTLET &...
FIREPLACE PLACEMENT Our Infrared fireplace heater is a very safe and effective room heater. It produces safe, clean and economical heat by utilizing quartz infrared heating elements and heat exchangers. The heating process of the Infrared fireplace heater is similar to the way the sun warms the earth. The infrared elements warm the heat exchangers and the whisper quiet fan distributes the accumulated warmth.
FIREPLACE OPERATION Plug your Infrared fireplace heater power cord into a 120V, 15amp or 20amp three-bladed receptacle. To Turn the Fireplace On: Press the Power button on the control panel or on the remote control. Default Set Temperature: The default set temperature every time the heater is powered on is typically 72°, this cannot be changed.
TROUBLESHOOTING If your heater unit shuts off unexpectedly: 1. Be sure the power cord is plugged into a working electrical outlet. 2. Check for any obstructions. If you find one, turn the hearting unit OFF and unplug it. Wait at least 10 minutes to allow the heating unit to cool completely before removing any obstruction.
LIFESMART limited warranty, and may be redirected to said retailer or third party for coverage. Any Refunds or monetary compensations must be claimed through the place of purchase (retailer), and not through LIFESMART as the manufacturer.
Disclaimers LIFESMART shall not be liable for any loss due to use (or misuse) of the heater or other LIFESMART products or other incidental or consequential costs, expense or damages without irrefutable foundations. Under no circumstances shall LIFESMART or any of its representatives be held liable for injury to any person or damage to any property, however arising.
Need help?
Do you have a question about the LS2002FRP13 and is the answer not in the manual?
Questions and answers