Page 1
Infrared Fireplace Heater OWNERS INSTALLATION AND OPERATING MANUAL Model: LS-IF1500-DOFP Safety Notice Please read this entire Installation and Operating Manual BEFORE installing and using your new Infrared Fireplace Heater. Failure to fully understand and follow instructions may result in property damage, bodily injury, or even death.
INTRODUCTION Thank you for choosing one of the best Infrared absorption fireplace heaters available in the market today. By using this infrared fireplace heater you can efficiently heat up to 1500 square feet! You can even turn down the main thermostat in your home and let this heater carry some of the home heating duty.
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THE HEATER WARNING ! POTENTIAL FOR ELECTRICAL HAZARD! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1.
Page 5
15. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or re-locatable power tap (outlet/power strip). This heater has a self – protection function. If the heater does not operate normally, check cord and heater placement, then UNPLUG IT FROM THE OUTLET &...
This process is unique among heaters in that it minimizes wasteful heat collection at the ceiling height of rooms and targets it toward the living space instead. To achieve maximum efficiency of your Model LS-IF1500-DOFP Infrared fireplace heater, please consider the following recommendations: Locate your Infrared fireplace heater close to an inside wall of the room in which it will be used.
FIREPLACE OPERATION Plug your Infrared fireplace heater power cord into a 120V, 15amp or 20amp three-bladed receptacle. To Turn the Fireplace On: Press the Power button on the control panel or on the remote control. Default Set Temperature: The default set temperature every time the heater is powered on is typically 72°...
TROUBLESHOOTING If your heater unit shuts off unexpectedly: 1. Be sure the power cord is plugged into a working electrical outlet. 2. Check for any obstructions. If you find one, turn the hearting unit OFF and unplug it. Wait at least 10 minutes to allow the heating unit to cool completely before removing any obstruction.
LIFESMART warranty department. The purchaser may also opt to ship the product to LIFESMART to have it repaired. The purchaser will be responsible to prepay any shipping charges (both ways), export taxes, custom duties and taxes, or any other charges associated with the transportation of the unit.
Page 10
Protectors/GFCI Disclaimers LIFESMART shall not be liable for any loss due to use (or misuse) of the heater or other LIFESMART products or other incidental or consequential costs, expense or damages without irrefutable foundations. Under no circumstances shall LIFESMART or any of its representatives be held liable for injury to any person or damage to any property, however arising.
Be Patient, Clear, and Concise. Describe the issue and symptoms you have for, and about the product. A certified LIFESMART Technical Support agent will give you an evaluation of your issue and your resolution options. If the answer is not available at that time, you will be referred to the appropriate channels, or given a call/e- mail back within 72 hours with an answer or resolution.
Need help?
Do you have a question about the LS-IF1500-DOFP and is the answer not in the manual?
Questions and answers