Linksys BEFCMU10 ver.2 User Manual page 10

Installing the USB Driver for Windows 2000
The USB CABLE Icon
1. Start up your PC. Windows will notify you that it has detected new hard-
ware. Insert the Setup CD into the CD-ROM drive.
2. When the Found New Hardware Wizard screen appears to confirm that
the USB Modem has been identified by your PC, make sure the Setup CD
is in the CD-ROM drive and click Next.
14
Instant Broadband
Figure 3-10
Figure 3-11
TM Series EtherFast
3. Select Search for a suitable driver for my device and click the Next but-
ton.
4. Windows will now search for the driver software. Select only CD-ROM
drives and click the Next button.
® Cable Modem with USB and Ethernet Connection
Figure 3-12
Figure 3-13
15