Sirius Satellite Radio Stiletto 2 User Manual page 98

4. As shown in the following illustration, peel the protective material from the adhesive
strips and press the rubber cover/tail firmly into place on the vehicle.
Attach Rubber Cover/Tail Attach Rubber Cover/Tail
Remove Adhesive Strips Remove Adhesive Strips
Press Firmly in Place on Vehicle
5. Double check that the location of the antenna and rubber cover/tail are correct, and
continue to press firmly down on rubber cover/tail for another 30 seconds. At room
95
Additional Information
Protective Material
Antenna Cable
Strain Relief
Adhesive Strips
Rubber Cover/Tail