Alpine CDA-9884E Owner's Manual page 39

01GB00CDA9884.book Page 37 Friday, September 28, 2007 10:24 AM
<JAPANESE CAR>
This unit
Ground Lead
3
*
• Secure the ground lead of the unit to a clean metal spot using a
3
screw (* ) already attached to the vehicle's chassis.
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB cable.
This unit
USB connector
Cable (sold separately)
Remove USB memory
Pull out USB memory squarely from the USB cable.
This unit
USB connector
Cable (sold separately)
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
• Route the USB cable away from another cables, etc.
01GB06CDA9884.fm
Front Frame
Screws (M5 × 8)
(Included)
Mounting Bracket
USB memory
(sold separately)
USB memory
(sold separately)
37
ALPINE CDA-9884E 68-09359Z41-A (EN)
-EN