Advertisement
To fit the rear panel/splashback,
slide the lugs on the bottom of the
panel into the matching slots on rear
of stove and fix with screws
provided.
32
GB
Install the cooktop
Take the crown caps and burner
crowns out of the oven, and put them
to the correct place on the cooktop.
The installation must be tied in very
well.
Crown cap and Burner crown must be tie in
very well, otherwise the flame may not
soundness. Once this happened, close the
tap, re-install the crown cap and burner
crown when the cooker is cooling down.
The cooker should be connected to a gas
supply of the particular type of gas that the
appliance is manufactured to function with.
Information about the type of gas that the
cooker has been adapted to by the factory
is shown on the data plate. The cooker
should be connected exclusively by an
appropriately authorized fitter and only he
or she has the right to adapt the cooker to
a different type of gas.
A fitter should:
z
have a gas fitter's authorisation
z
be acquainted with the information
included on the data plate of the
cooker about the type of gas to which
the cooker is adapted; the information
should be compared with gas supply
conditions at the place of installation.
z
check:
-airing efficiency, that is efficiency of
air exchange in the rooms,
-tightness of gas fitting connections,
-effectiveness of all functional
elements of the cooker,
-if the electricity supply is adapted to
function with a safety ground lead
(zero)
z
provide the user with a connection
certificate and give him or her
instructions in cooker use.
The cooker may only be connected to a
liquid gas cylinder or the existing gas
supply by an authorized fitter, observing all
safety rules.
z
Connect the appliance to the gas
coupling by means of certified flexible
hose. The hose may not touch the
bottom panel of the appliance or the
rear panel and ceiling of the oven.
z
Connect the appliance in accordance
with the regulations of the local gas
supplier.
GB
On completion of the cooker installation,
the tightness of all connections should be
checked, e.g. applying water with soap.
Do not use fire to check tightness.
In case the appliance is connected by
means of a flexible hose the position A of
the hose is not permissible.
In case the connection hose is made of
metal, position A is permissible.
A
D
B
C
Start using the appliance in accordance
with the instructions for use.
Lit up all burners and check the stability of
the flame with high and low setting. Adjust
air intake if necessary. After that, take time
and explain the operation and control of
the appliance to the user and read with him
the instructions for use.
Liquefied gas connection
33
Advertisement
