Uniden D2380 Series User Manual page 20

D2380 series
Hide thumbs Also See for D2380 Series:
Table of Contents

Advertisement

Audio issues
Callers sound
weak or soft.
There's a lot of
noise or static on
the line
Caller ID problems
No handsets display Caller
ID information.
Caller ID displays briefly
and then clears.
Multi-handset problems
I can't transfer calls.
Two handsets can't talk to a caller.
A handset says Unavailable.
I can't register a new handset.
Answering system problems
The answering system does not
work.
The system won't record
messages.
A handset can't access the
answering system.
My outgoing message is gone.
I can't hear the base speaker.
Messages are incomplete.
The system keeps recording when
I answer on an extension.
20 - English
Possible solutions
x Move the handset closer to the base.
x Keep the handset's battery fully charged.
x Increase the earpiece volume.
x Check for interference from appliances (microwave ovens, TVs,
etc.) or wireless devices (baby monitors, WiFi equipment, etc.).
Move the handset or base away from the interference source.
x If you use a telecoil hearing aid, turn on T-coil mode (see p. 8).
x If you have any service that uses the phone line, add a DSL or
telephone line filter (see page 21).
Possible solutions
x Let calls ring twice before answering.
x Make sure your Caller ID service is active.
x You may have to change the line mode. Contact
Customer Service for instructions.
Possible solutions
x Make sure the answering system is on.
x Make sure the base is plugged in.
x See if
x Delete messages (memory may be full).
x See if another handset is using the system.
x Make sure the phone is in standby.
x If there was a power failure, re-record your
personal outgoing message.
x Make sure call screening is turned on.
x Change the base speaker volume.
x Increase the
x Delete messages (memory may be full).
x You may have to change the line mode.
Contact Customer Service for instructions.
Possible solutions
x Reset the handset (see page 21).
x See if any handset is in Privacy Mode.
x Move the handset closer to the base.
x See if any handset is in Privacy Mode.
x Reset the handset (see page 21).
x See if you have 12 registered handsets.
Record Time
is set to
Record
Time.
Announce
Only.

Advertisement

Table of Contents
loading

Table of Contents