Tanita AM-120E Instruction Manual page 17

Setting Your Stride Length
Note: The stride length is taken as the distance between the toes on one foot and the toes
on the other foot. In order to accurately find your average stride length, walk for 10
steps and then divide the total walked distance by 10.
E.g. If you walked 6.5 meters in 10 steps,
6.5/10 (steps) = 0.65 meters = 65 cm
1) After setting your [Body Fat
Percentage], the [Stride Length]
display flashes.
Note: The stride length shown in the
display is a value calculated
from your height. If you are
performing this setting for the
second or subsequent times,
the previous setting value is
displayed.
2) Press the
MODE button to set your [stride
length].
Press and hold to advance the setting
rapidly.
(Setting range is 20 cm–150 cm)
3) Press the SET button to finalize
the setting.
After setting your [Stride Length],
[Today's Measurement] is displayed.
This completes the initial settings.
This completes the initial settings.
17
MEMORY button/
Eng