Suzuki HG-425e Assembly Manual

4. P A 5. I ING T
EDAL TTACHMENT NSTALL
(Continued)
E. A.
Attach the pedal support rods to the piano Make a thick pad by folding a blanket
bottom. Find the pre-drilled holes on either or quilt in quarters. Place it so the pedal
side of the speaker. Use the remaining assembly will land on it. Using 2 or 3
4 Phillips screws. persons, lift the piano and pivot onto
the pad.
6. P Y N G P
OSITIONING OUR EW RAND IANO
(Continued)
A. B.
Adjust the Pedal Feet: Install the Power Cord:
With your piano placed in its final position, Install the power cord (E) into its receptacle
reach under the pedal box and adjust the on the bottom left of the piano.
pedal feet down to firmly contact the floor by
• Connect the male end to an appropriate
turning the knob counter clockwise as shown.
wall receptacle.
• Please refer to the piano owner's manual
for piano operation.
L L 6. P
HE EFT EG
B. WARNING:
With one person holding the piano in
When positioning the piano in your home it
position, go under the piano and install
is recommended that you carry it to the final
the left leg as shown in steps A & B in
position. The solid brass casters may be
Section 3, "Attaching the Legs to the
Piano." Next, lift the piano and remove damaged by rough surfaces and the casters
may damage some flooring surfaces like
the thick pad.
hardwood or tile.
E Y N
NJOY OUR
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Y N G P
OSITIONING OUR EW RAND IANO
WARNING: DO NOT PUSH PIANO!
Do not roll the piano on its caster wheels. The
legs and pedal assembly may catch on irregular
flooring surfaces like door thresholds and soft to
hard flooring surfaces. This may cause the legs
to break!
S G P !
EW UZUKI RAND IANO
Questions?
www.suzukimusic.com/hg-425e
Visit
1•800 854 1594
Or Call • •
Easy
Assembly
Guide
STOP!
DO NOT ASSEMBLE YOUR PIANO
BEFORE READING THIS GUIDE!
IF YOU HAVE ANY QUESTIONS OR PROBLEMS,
DO NOT CALL OR RETURN PRODUCT TO THE STORE
www.suzukimusic.com/hg-425e
Visit
OR CALL THIS TOLL FREE HELP LINE.
1 8OO 854 1594
• • •