Table of Contents
Advertisement
• If possible, you should limit the "Visibility" of your
mobile phone. This will enable you to make it
significantly more difficult for unknown devices to try
to establish a connection with your mobile phone.
To Turn Off Automatically
→
"Settings"
"Connectivity"
→
"Bluetooth Settings"
1.
Select the desired time.
Your phone turns the function off automatically in
the specified time.
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX
data to authenticate the passcode (exchanging the
passcode) before pairing devices.
→
"Settings"
"Connectivity"
→
"Bluetooth Settings"
1.
Select "On" or "Off".
Note
• No authentication is required for the paired devices
even when Authentication is set to "On".
• Even if you select "Off", you may authenticate the
passcode when the sender requests it.
→
→
"Bluetooth"
"Bluetooth Time Out"
→
→
"Bluetooth"
"Authentication"
Using the Infrared Function
→
"Settings"
"Connectivity"
1.
Select "On" or "Off".
If the Bluetooth wireless function has been
activated, you will be asked whether you wish to
deactivate it or not. Press [Yes].
"
" will appear on the screen.
The infrared setting will return to off when no data
is transmitted/received via infrared communication.
PC Software
(M 9-5-3)
By connecting your phone to a PC, you can transmit
pictures, sounds, video clips, and Phonebook entries.
Follow the procedure to select the connection method
(Bluetooth wireless, USB or Infrared connection). For
details on getting the link software, see page 118.
→
"Settings"
"Connectivity"
1.
Select the desired connection type from "Data
Cable", "Infrared" or "Bluetooth".
(M 9-5-2)
→
"Infrared"
→
"PC Software"
Settings
111
Advertisement
Table of Contents
