Sharp AJ-2200 Online Manual page 9

Windows
Hide thumbs Also See for AJ-2200:
Table of Contents

Advertisement

"Paper/Quality" Tab Settings (part 2)
Paper Source
Select "Tray" or "Bypass" for your print job.
Tray
Paper is fed to the printer from the paper tray.
If the "Tray" is selected from this tab and paper is placed in
the bypass tray, the paper in the bypass tray will be fed first,
and then paper will be fed from the paper tray.
Bypass
Paper will be fed to the printer from the bypass tray. Only one sheet can
be loaded into the bypass tray. To load paper into the bypass, align the
paper with the right side of the bypass and press the paper button.
When printing one page:
Load paper into the bypass then start printing from your computer. If
paper is not loaded before printing is started, the paper lamp on the
printer will blink and the message "Please set a sheet of paper on
bypass" will appear on the screen of the computer.
When printing more than one page:
Repeat as above for each page.
Make sure to insert banner paper through the bypass tray.
Max. 5 sheets of banner paper can be set to the bypass
tray.
Media
Select the type of paper to be used. Select from "Plain",
"Coated", "Photo", "Transparency", "T-shirt transfer", and
"Card Stock". Insert the paper that was selected into the tray.
For more information on various paper types, refer to the
following table.
Printer Driver Settings
How to Use the
Online Manual
Windows 95/98/Me/NT4.0
Print
Windows 2000/XP
Media
Description
Plain
Normal office paper
(copier paper and high
quality paper)
Coated
The print side of coated
paper is whiter.
Photo
The print side of photo
paper is glossy.
Transparency
Overhead presentation on
clear film. The print side of
transparency film is rougher.
T-shirt transfer
This media is to be
transferred to cloth
materials by an iron.
Card Stock
Thick plain paper
! Be sure to use Sharp recommended OHP films
when you select "Transparency".
! If you select "T-shirt transfer", the original image will
be reversed on the printed media to make a proper
image on the T-shirt.
! When "Card Stock" is selected, be sure to turn the
paper knob to (
stock.
! Depending on this "Media" setting, some of the "Print
Quality" settings cannot be selected.
Print Status
Sharing Printer
Window
Windows 95/98/Me/NT 4.0
Printer Driver Settings
Media Usage
Corporate documents
Graphics, Images
Photographs
Overhead
presentations
T-shirt, Place mat
Card printing
) setting to feed the thicker card
7
Maintenance
Troubleshooting

Advertisement

Table of Contents
loading

Table of Contents