Failed To Install The Printer Driver (Windows 2000/Xp) - Sharp AJ-2200 Online Manual

Failed to Install the Printer Driver (Windows 2000/XP)

If "A printer could not be found" window appears and you click the "Complete" button while installing the printer
driver onto Windows 2000/XP, follow the steps shown below.
If using Windows 2000
1 1 1 1
Connect the printer and your computer by interface
cable. (If you are using a parallel cable, restart your
computer after connecting the cable.)
"Digital Signature Not Found" window will appear. Make
sure to click the "Yes" button.
Now, you have completed the installation. If you have
clicked the "No" button, go to the next step.
2 2 2 2
Refer to "Installing onto Windows 2000/XP" in the
Setup Guide and Operation Manual to install the
driver, following the steps from step 4.
Printer Driver Settings
How to Use the
Online Manual
Windows 95/98/Me/NT4.0 Windows 2000/XP
If using Windows XP
1 1 1 1
Connect the printer and your computer by interface
cable.
"Found New Hardware Wizard" window will appear.
2 2 2 2
Be sure to click the "Cancel" button.
3 3 3 3
Refer to "Installing onto Windows 2000/XP" in the
Setup Guide and Operation Manual to install the
driver, following the steps from step 4.
Print Status
Print
Window
Troubleshooting
Sharing Printer Maintenance
66
Troubleshooting