Preparing The Touch Pen And How To Use It - Sharp PN-ZT10E Operation Manual

Preparation

Preparing the touch pen and how to use it

Inserting batteries
1. Rotate the battery cap and remove it.
2. Insert the supplied batteries (R-03 ["AAA" size] x 2 pieces) in the orientation as shown in the
illustration. Attach the battery cap.
Tips
• The supplied batteries (R-03 ["AAA" size] x 2 pieces) may become exhausted in a shorter time period due to the
storage condition. It is recommended that you replace them with new alkaline batteries (commercially available)
earlier than the specifi cation.
• If the touch pen is not used for a long time, take the batteries out of the touch pen.
• Use manganese or alkaline batteries only.
How to use the touch pen
Caution
• Do not use the touch pen for any purpose other than to operate the touch panel.
• Do not apply a strong force to the pen tip.
• Do not cover the section of the infrared transmitter with your hand.
• Using remote controllers for a TV, VCR or similar devices simultaneously with the touch pen may cause a
malfunction.
• Do not store the touch pen in a vertical position (with the tip downward).
1. Set the Pen switch of the touch panel to ON.
2. Use the touch pen on the screen.
Touching the screen with the touch pen works as a left click of the mouse.
When the screen is touched while the function switch of the touch pen is held down, the function
specifi ed for "Touch Pen Switch" of the TouchPanel Setting Program is activated.
16
E
(Continued)
Battery cap