Garmin GTN 725 Cockpit Reference Manual page 79

Message
REMOTE KEY STUCK-
RP Mode key is stuck.
REMOTE KEY STUCK-
TAWS inhibit key is
stuck.
REMOTE KEY STUCK-
Remote go around key
is stuck.
SELECT FREQUENCY-
Select appropriate NAV
frequency for approach.
SET COURSE-
Set course on CDI/HSI
to [current DTK].
190-01007-04 Rev. D
Description
The remote RP MODE
key/switch has been in
a pressed position for
at least 30 seconds. This
input will now be ignored.
This input is not available
in all installations.
The TAWS INHIBIT
discrete input has been
in a pressed position for
at least 30 seconds. This
input will now be ignored.
This input is not available
in all installations.
The remote go around
(RMT GO ARND) key/
switch has been in
pressed position for at
least 30 seconds. This
input will now be ignored.
This input is not available
in all installations.
Correct NAV frequency
is not set in the active
NAV frequency for the
approach procedure.
The selected course on
the CDI/HSI does not
match the current desired
track.
GTN 725/750 Cockpit Reference Guide (CRG)
Action
Verify the RP MODE key/
switch is not stuck. Contact
dealer for service if this
message persists.
Verify the TAWS INHIBIT
key/switch is not stuck.
Contact dealer for service if
this message persists.
Verify the RMT GO ARND
key/switch is not stuck.
Contact dealer for service if
this message persists.
Insert the correct frequency
into the active navigation
frequency window.
Set the CDI/HIS selected
course to the current
desired track.
71