Garmin GTN 725 Cockpit Reference Manual page 67

Message
CROSSFILL ERROR-
Crossfill is inoperative.
See CRG for crossfilled
items.
CROSSFILL ERROR-
GTN Navigation DB
mismatch. See CRG for
crossfilled items.
CROSSFILL STATUS-
Crossfill is turned off.
DATABASE-
Chart database valid
until [DATE].
DATABASE-
A procedure has been
modified in a cataloged
flight plan.
190-01007-04 Rev. D
Description
An error was detected
during unit-to-unit
communication of data.
This can be caused by
problems with HSDB
wiring or by either GTN
needing service. See the
items listed in the System
section of this manual for
crossfilled items.
The navigation databases
do not match between
GTNs resulting in a loss of
communication between
two units.
Crossfilled is turned off.
The GTN is configured for
ChartView or FliteCharts
and the chart database
has or is about to expire.
A new database update
caused a procedure to
be truncated because
the flight plan now has
too many waypoints or
removed a procedure
because it no longer exists
in the database.
GTN 725/750 Cockpit Reference Guide (CRG)
Action
Start both GTNs in
Configuration Mode and
ensure that both GTNs are
configured for crossfill.
Contact dealer for service.
Check the specified
database version of both
GTNs and ensure it is up-to-
date. Updated the specfied
databse if needed.
No action.
Verify chart database
expiration date on the
System – System Status
page. Update chart
database if necessary for
operations.
Verify stored cataloged
flight plans and procedures.
Modify stored flight
plans and procedures as
necessary to include the
current procedures by re-
loading those procedures to
the stored flight plan routes.
59