Table of Contents
Advertisement
replacing the battery cover
1. Properly align the battery cover on the
back of the device.
2. Press the battery cover down until it
snaps into place.
Charging the battery
Notice
Your device will not charge if the
temperature has exceeded 140°F (60°C). If
the device is mounted on the windscreen,
remove it from the mount and place it
somewhere out of direct sunlight to allow
the battery to charge.
Charge the battery for at least four hours
before using the device for the first time.
If you completely discharge the battery,
recharge it for at least 20 minutes before
turning on your device.
4
1. Insert the plug into the AC power
adapter, if necessary.
2. Plug the USB cable into the AC adapter.
3. Connect the micro‑USB end of the USB
cable to the connector on the bottom of
the device.
4. Plug the AC adapter into a power
outlet.
alternative charging methods
• (Preferred) Use the vehicle power cable
connected to the cradle, with the device
in the cradle.
• Use the vehicle power cable connected
to the device (not the cradle).
• Use the USB cable to connect your
device to a computer.
registering the device
1. Go to http://my.garmin.com.
2. Click Register.
3. Follow the on‑screen instructions.
4. Keep the original sales receipt, or a
photocopy, in a safe place.
Garmin-Asus A10 Quick Start Manual
Advertisement
Table of Contents
