Child Restraint And Safety Belt Maintenance - Ford EXPLORER 2014 Owner's Manual

Safety Belts 49

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE

Inspect the vehicle safety belts and child safety seat systems periodically to
make sure they work properly and are not damaged. Inspect the vehicle
and child seat safety belts to make sure there are no nicks, tears or cuts.
Replace if necessary. All vehicle safety belt assemblies, including retractors,
buckles, front safety belt buckle assemblies, buckle support assemblies
(slide bar-if equipped), shoulder belt height adjusters (if equipped),
shoulder belt guide on seatback (if equipped), rear inflatable safety belts
(if equipped), child safety seat LATCH and tether anchors, and attaching
hardware, should be inspected after a crash. See the child restraint
manufacturer's instructions for additional inspection and maintenance
information specific to the child restraint.
Ford Motor Company recommends that all safety belt assemblies in use
in vehicles involved in a crash be replaced. However, if the crash was
minor and an authorized dealer finds that the belts do not show damage
and continue to operate properly, they do not need to be replaced.
Safety belt assemblies not in use during a crash should also be inspected
and replaced if either damage or improper operation is noted.
For proper care of soiled safety belts, see Interior in the Cleaning
chapter.
2014 Explorer (exp)
Owners Guide gf, 3rd Printing, September 2013
USA (fus)