Advertisement
Mega Bar UV100™
Channel
Value
1
0 - 255
2
0 - 255
Mega Bar UV100™
First unplug the power. The fuse holder is located next to the power
cord. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
Mega Bar UV100™
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
American DJ® - www.americandj.com - Mega Bar UV100™ Instruction Manual Page 9
©
DMX Values and Functions
Function
DIMMING
0%
100%
STROBING
0%
100%
Fuse Replacement
Trouble Shooting
Mega Bar UV100™
American DJ® - www.americandj.com - Mega Bar UV100™ Instruction Manual Page 10
©
Mounting Bracket
Advertisement
