Planar LA1500R User Manual page 24

LA1500RTR Install Instructions
If you are using a PC running Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0,
follow the instructions below:
1. Power on the PC.
2. Be sure the USB cable is connected from the PC to the LCD display.
3. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows® XP Embedded,
follow the instructions below:
Express:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Make sure that your EWF is disabled. If your EWF is enabled, please
disable the EWF by using the EWF Manager command.
4. Once the EWF is disabled click on the XP driver at www.planar.com/
support and follow the step-by-step instructions as shown on the
pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped fi le at
www.planar.com/support.
If you are using a PC running Windows® CE,
follow the instructions below:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Using Platform Builder, build an image fi le by following the step-by-step
instructions found in the zipped fi le at www.planar.com/support.
If you are using a PC running Linux or Apple® Mac OS,
follow the instructions below:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped fi le at
www.planar.com/support.
24
LA1500R, LA1500RTR and LA1500RTS User's Guide (
020-0319-03 Rev. A)