Advertisement
MX395 Low Profile Boundary Microphones
Furnished Accessories
65A2166
Rubber isolation Rings
30A1438
Fastening Hex Nut
95A1118 (LED Models only)
5-Pin XLR-Female Connector
65A2190
Wing Nut
Architectural Specifications
MX395AL/C – The microphone shall be a surface mounted, aluminum, electret condenser microphone with a cardioid polar pattern. The
visible diameter and height of the microphone above the mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17kHz and the
sensitivity 18 mV/Pa.
MX395B/C – The microphone shall be a surface mounted, black, electret condenser microphone with a cardioid polar pattern. The visible
diameter and height of the microphone above the mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17kHz and the
sensitivity 18 mV/Pa.
MX395B/C-LED – The microphone shall be a surface mounted, black, electret condenser microphone with a cardioid polar pattern. The
microphone shall include a logic controlled, bi-colored status indicator ring. The visible diameter and height of the microphone above the
mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response range shall be 50 Hz to 17kHz and the sensitivity 18 mV/Pa.
MX395AL/O - The microphone shall be a surface mounted, aluminum, electret condenser microphone with an omni polar pattern. The
visible diameter and height of the microphone above the mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17kHz and the
sensitivity 42 mV/Pa.
MX395B/O - The microphone shall be a surface mounted, black, electret condenser microphone with an omni polar pattern. The visible
diameter and height of the microphone above the mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17kHz and the
sensitivity 42 mV/Pa.
MX395B/O-LED – The microphone shall be a surface mounted, aluminum, electret condenser microphone with an omni polar pattern. The
microphone shall include a logic controlled, bi-colored status indicator ring. The visible diameter and height of the microphone above the
mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response range shall be 50 Hz to 17kHz and the sensitivity 42 mV/Pa.
MX395W/O - The microphone shall be a surface mounted, white, electret condenser microphone with an omni polar pattern. The visible
diameter and height of the microphone above the mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17kHz and the
sensitivity 42 mV/Pa.
MX395AL/BI – The microphone shall be a surface mounted, aluminum, electret condenser microphone with a bi-directional polar pattern.
The visible diameter and height of the microphone above the mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone
shall be resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17kHz and
the sensitivity 14 mV/Pa.
MX395B/BI – The microphone shall be a surface mounted, black, electret condenser microphone with a bi-directional polar pattern. The
visible diameter and height of the microphone above the mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17kHz and the
sensitivity 14 mV/Pa.
MX395B/BI-LED – The microphone shall be a surface mounted, black, electret condenser microphone with a bi-directional polar pattern.
The microphone shall include a logic controlled, bi-colored status indicator ring. The visible diameter and height of the microphone above the
mounting surface shall be 1 ¼ " (32mm) and 5/8" (24 mm). The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response range shall be 50 Hz to 17kHz and the sensitivity 14 mV/Pa.
www.shure.com
United States:
Europe, Middle East, Africa:
Shure Incorporated
Shure Europe GmbH
5800 West Touhy Avenue
Wannenäckerstr. 28,
Niles, IL 60714-4608 USA
74078 Heilbronn, Germany
Phone: 847-600-2000
Phone: 49-7131-72140
Fax: 847-600-1212
Fax: 49-7131-721414
Email: info@shure.com
Email: info@shure.de
©2007 Shure Incorporated
AL0000
Cardioid
Bidirectional
Omnidirectional
Asia, Pacific:
Canada, Latin America,
Shure Asia Limited
Caribbean:
3/F, Citicorp Centre
Shure Incorporated
18 Whitfield Road
5800 West Touhy Avenue
Causeway Bay, Hong Kong
Niles, IL 60714-4608 USA
Phone: 852-2893-4290
Phone: 847-600-2000
Fax: 852-2893-4055
Fax: 847-600-6446
Email: info@shure.com.hk
Email: international@shure.com
Advertisement
