Shure MX395 Quick Manual

MX395 Low Profile Boundary Microphones
Overview
The Microflex Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms, these
microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors and pickup patterns for customized table and
ceiling installations.

Specifications

(subject to change)
Type
Frequency Response
Polar Pattern (at 1 kHz)
Output Impedance
Output Configuration
Sensitivity
(at 1 kHz , open circuit voltage)
1 Pascal=94 dB SPL
Maximum SPL
(1 kHz at 1% THD, 1 kΩ load)
Equivalent Output Noise
(A-weighted)
Signal-to-Noise Ratio
(referenced at 94 dB SPL at 1 kHz)
Dynamic Range
(1 kΩ load at 1 kHz)
Common Mode Rejection
Preamplifier Output Clipping Level
Polarity
Weight
Logic Connections
Environmental Conditions
Power Requirements
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, O = Omnidirectional, BI = Bidirectional
MX395B/C, MX395B/BI, MX395B/O
MX395AL/C, MX395AL/BI, MX395AL/O
MX395W/O
MX395B/C-LED, MX395B/BI-LED, MX395B/O-LED
www.shure.com
Condenser (electret bias)
50–17000 Hz
MX395/O: Omnidirectional
MX395/C: Cardioid
MX395/BI: Bidirectional
EIA Rated at 150 Ω (170 Ω actual)
Active Balanced
Cardioid: –35 dBV/Pa (18 mV)
Omnidirectional: –28 dBV/Pa (42 mV)
Bidirectional: –37 dBV/Pa (14 mV)
Cardioid: 121 dB
Omnidirectional: 114 dB
Bidirectional: 123 dB
Cardioid: 28 dB SPL
Omnidirectional: 21 dB SPL
Bidirectional: 29 dB
Cardioid: 66 dB
Omnidirectional: 75 dB
Bidirectional: 65 dB
Cardioid: 93 dB
Omnidirectional: 93 dB
Bidirectional: 94 dB
45 dB minimum (10 Hz to 100 kHz)
-8 dBV (0.4 V) (1% THD)
3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to
pin 3 of output XLR connector.
5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to
pin 2 of output XLR connector.
Net: .136 kg (.30 lb) Packaged: 0.374 kg (0.825 lbs)
LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
Operating Temperature: -18–57 °C (0–135 °F)
Storage Temperature: -29–74 °C (-20–165 °F)
Relative Humidity: 0–95%
MX395: 11–52 Vdc phantom, 2.0 mA
MX395-LED: 48–52 Vdc phantom, 8.0 mA
Black, 3-pin XLR
Aluminum, 3-pin XLR
White, 3-pin XLR
Black, 5-pin XLR, logic-controlled muting functions, Bi-color Status Indicator Ring
MX395
Low Profile
Boundary Mic
Diam. x H: 1 1/4" (32 mm) x 4" (102 mm)