Advertisement
3
Attach Rainfly
– Drape Rainfly over tent frame, with
rainfly doors lining up over tent doors.
(illus. 8)
– Connect the four clips (found at the
Rainfly corners) to the clips located at
the corners of the tent. (illus. 9)
– Stake out rainfly doors, keep rainfly taut.
(illus. 7)
– Attach Guy Lines to Guy Wings on
the sides of the Rainfly and stake out
(illus.10).
Pro-Tips
• Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside surfaces of your tent.
Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside your tent. It is NOT LEAKAGE
through the tent fabric. Opening the interior access zippers and adjusting the vents on the rainfly, allowing good ventilation
through the tent, can minimize condensation.
• Never store tent, even for a short period of time, without
drying it thoroughly and brushing off caked dirt. Do not pack
stakes or poles inside your tent. Use separate storage bag.
• STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE
ITSELF. NEVER PULL ON THE TENT FABRIC OR TENT STAKE
LOOP TO REMOVE STAKE.
• TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER
DURING STORAGE.
PRINTED IN CHINA
© 2005 The Coleman Company, Inc. All Rights Reserved.
Guy Wings
Guy Line
illus. 6
Rainfly clips
onto pole
stake loop
illus. 5
Rainfly
illus. 7
Completed tent
with Rainfly.
3600 N. Hydraulic • Wichita, Kansas 67219
1-800-835-3278 • www.coleman.com
Advertisement
