Panasonic CF-T2 Series Operating Instructions Manual page 17

How to Use the Hand Strap
Log on to Windows.
Windows XP
After confirming that the hard disk drive indicator (
user and input the password, then select
computer will not operate.
Windows 2000
After confirming that the hard disk drive indicator (
name and password, then select [OK]. Until the correct user name and password are
entered, the computer will not operate.
Select your application.
You are able to start working on your computer.
NOTE
The power saving function is factory set, so if there is no input from a key, the touch
pad, touchscreen (only for models with touchscreen) or an external mouse (when
one is connected) for a certain interval of time, the power to the LCD and hard disk
may be turned off. The LCD will resume operation when the touch pad, touchscreen
(only for models with touchscreen) or an external mouse (when one is connected) is
used or a key is pressed.
The power to the LCD may be turned off even when an application software is being
installed. In this case, because it is conceivable that a selection dialog box will be
shown, do not press Space or Enter to attempt to resume from this condition
as doing so may trigger a selection, but instead, press a key unrelated to the direct
triggering of a selection, like Ctrl .
In addition, when the computer is left alone, it automatically enters the standby or
hibernation mode (
will resume by sliding the power switch.
You may hear a mechanical "click" shortly after the hard disk indicator has turned
off when there has been no input from a key or device operation, when the computer
enters the standby or hibernation mode, or when Windows is shut down. This is the
sound of the head shifting positions, to reduce power consumption or to protect the
hard disk from shocks. This sound does not indicate a malfunction.
Windows XP
When switching to a different user with the Fast User Switching function, it may
not be possible to set the settings of the display. In this case, log off all users, and
try the operation once more. If the problem persists, restart the computer.
The hand strap is convenient for computing while standing.
To carry the computer, put your hand between the computer and the hand strap to prevent it
from falling, and firmly hold the computer when using it.
) has turned off, select the
. Until the correct password is entered, the
) has turned off, input the user
"Standby/Hibernation Functions"). The computer