Advertisement
Making Calls
Once the headset is successfully paired and connected with your mobile phone, you
can use it to make and receive calls. The headset can be used with voice dialling if
your mobile phone supports this feature. Please consult your mobile phone's user
manual for more information.
1. Using voice dialling:
Double click the MFB, wait for the voice prompt then say the name of the
person you wish to call.
2. Using the phone keys to make a call:
Enter and dial the number on the screen of the mobile phone as you would
normally do. Once the call has been set up, the sound will be transmitted to
your headset automatically.
3. Redial:
Press and hold the MFB for 2 seconds to redial the last number you called.
Answering / Ending / Rejecting Calls
When the headset is turned on and there is an incoming call, you will hear a voice
prompt reading the incoming call phone number.
– Press the MFB once to answer the call.
– Press the MFB once to end the call.
– Hold the MFB down for 2 seconds to reject the call.
Caller ID Reading
The Bluetooth Headset will read the caller's phone number on an incoming call.
Put the Call on hold
In call wait state: Press and hold the MFB for 2 seconds to put the current call on
hold and accept the call waiting.
Press and hold the MFB for 2 seconds to resume the first call.
Transferring Calls
To transfer a call to the mobile phone and back: During both incoming and outgoing
calls, you can quickly press the MFB twice to transfer the call to the mobile phone. If
you want to transfer the call back to the headset, quickly press the MFB twice again.
Note: some mobile phones may require further confirmation.
Adjusting the Volume
Volume up: Hold down V+
Volume down: Hold down V-
Advertisement
