Advertisement
The Kogan Bluetooth 4.0 Handsfree Headset is a V4.0 Mono to Stereo Bluetooth
Headset with Voice Recognition, CVC for clear voice capture, Multipoint
functionality and an English incoming number reader.
Overview of the Bluetooth 4.0 Handsfree Headset
1. Charging Port (microUSB)
2. ON/OFF Switch
3. LED Light
4. MFB (Multifunction Button)
5. Speaker
6. Volume Up
7. Volume Down
8. Microphone
Charging the Battery
1. Plug the AC charger into the headset.
2. Plug the other end of the AC charger into your wall socket.
3. The red LED indicator will light up when the power is being supplied.
4. When the battery is fully charged, the red LED will go out and the blue LED
will light up.
Charging takes approximately 2 hours.
Low Battery Warning
The red LED light will flash when the battery is low.
At the same time, you can hear the voice prompt, At
this time, please charge your headset.
On iOS devices only, a battery indicator will also show
up in the information bar (as shown to the right).
Important
• For first time use, please charge the headset fully before use.
• You can also charge the Bluetooth Headset via a microUSB to USB cable
plugged into your computer.
Advertisement
