Advertisement
Multifunction Button
The multifunction button is used for: Pairing, Answer / End / Reject / Transfer Calls,
Voice Dialling, Redial, Play/Pause music.
Turning headset ON/OFF
To turn the headset on, slide the on/off switch down. The blue LED light will flash
and you will hear a voice prompt. The headset will now be turned on.
To turn the headset off, slide the on/off switch up. The red LED light will flash and
you will hear a voice prompt. The headset will now be turned off.
Pairing the Bluetooth Headset
You are required to pair the headset with your mobile phone once before using it.
1. Turn on the Bluetooth Headset. The LED light will flash red and blue
alternately and go into pairing mode automatically if there is no other
previously paired/connected devices in range.
2. Activate Bluetooth on your mobile phone.
3. Set you phone to discover "Jseven" and follow the instructions.
4. If your phone asks for a password/passkey or PIN code, comfirm with '0000'
(four zeroes).
5. When the phone and bluetooth headset are paired and connected, you will hear
the voice prompt.
Note:
1. If the Bluetooth Headset is not in pairing mode, your mobile phone will not be
able to find it. Please set the Bluetooth Headset into pairing mode before
making your mobile phone search for it. You can manually turn the Bluetooth
Headset into pairing mode by pressing and holding the MFB for 2 seconds
when the headset is on.
2. If no pairing is possible for a period of time (approximately 2 minutes), the
Bluetooth Headset will automatically leave pairing mode and go into idle
mode. The blue LED indicator will change to red and flash.
Advertisement
