Recording - Brookstone Video Spy Pen User Manual

recOrDINg

1 . Place the Video Spy Pen where it will get a clear view and audio of what
you want to record .
2 . Press the RECORD On/OFF BUTTOn on the top of the pen for 5 seconds .
3 . The WORkInG STATUS LED will illuminate amber and after 5 seconds
will blink blue to indicate recording has started .
4 . While recording, you may want to save sections of video to the pen's
internal memory .
5 . Press the RECORD On/OFF BUTTOn to save . Please note that the length
of file recorded will affect the time it takes to save . The WORkInG STATUS
LED will revert to yellow when saving is complete .
NOTe: The Video Spy Pen cannot record while saving a file.
6 . You may then resume recording by pressing the RECORD On/OFF BUTTOn .
The WORkInG STATUS LED will revert to blinking blue again to indicate it has
begun to record again .
Note: If you press the recOrD ON/OFF button for 5 seconds and the
WORkInG STATUS LED
memory is full.
5
light blinks 4 times and the unit shuts off, the