Handlebar; Seat Adjusting - Brookstone BodyForm User Manual

Attach the SEAT to the SADDLE POST by tightening the bolts (already mounted
on the seat).
Slide the SEAT POST, with the SEAT front facing forward, down into the base. Insert
and twist the SEAT ADJUSTINg KNOB (21) to lock the SEAT POST into position
at the correct height for you. You may also adjust the distance of the seat from the
HANDLEBARS with the pre-mounted knob under the SEAT.
IMPORTANT: Do not try to use the SEAT POST in a position in which the green band is above
the base. The green band is a marker to let you know the seat is at its highest position.
Attach the HANDLEBAR to the FRONT POST with the PULSE PADS facing up using
the HANDLEBAR ADJUSTER (30) and FLAT WASHER (5). Make sure to hold onto the
HANDLEBARS as they may shift while you tighten the screw. Plug the HAND-PULSE
WIRE into the jack on the back of the MONITOR.
7