Page 3
Dear Sir, Madam, Congratulations with your purchase of a portable domestic heater. You have purchased a quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly. Please read these Directions for Use first, to ensure maximum lifetime for your heater.
POWER lamp season with renewed fuel. • The right quality of fuel will be assured, when TIMER lamp you use Zibro Extra or Zibro Kristal for your heater. Air quality control • If you change to another brand and/or type of...
Your heater has been designed for use with high-quality water-free pure paraffin correct fuel will ensure safe, efficient, and oil, such as Zibro Extra or Zibro Kristal. Only fuels of this kind will ensure clean and comfortable use of your proper burning. Lower quality fuel may result in: heater.
MANUAL INSTALLING THE HEATER Carefully remove your heater from the box and check the contents. In addition to the heater you also need to have: a manual fuel pump a transportation cap these directions for use Keep the box and the packaging materials (Fig. A) for storage and/or transportation.
Check the removable tank fuel gauge while filling the tank (Fig. D). Stop filling by loosening the switch button on top of the pump (turn anti-clock- wise), once the gauge indicates that the tank is full. Never overfill the tank, especially not when the fuel is very cold (fuel expands when it heats up).
higher setting and the key on the left ( hour) to lower the temperature. Press once to increase the value one step. After approximately 10 seconds the °C mark and 4-digit will stop blinking and the setting will be locked (Fig. F). The available temperature settings range from 6°C minimum to 28°C maximum.
THE INFORMATION DISPLAY The information display not only serves as an indicator of the (set) time and temperature (sections C, E, and F), it also indicates any malfunctioning of the heater. The code on the information display tells you what is the matter: CODE INFORMATION WHAT TO DO...
THE CORRECT USE OF 'SAVE' The 'SAVE' function allows you to limit the temperature. When this function is activated, the heater will automatically switch off, when the room temperature exceeds the set temperature by 3°C. Subsequently, when the room temperature has dropped again to the set temperature, the heater will automatically switch on again.
We recommend that you remove dust and stains from time to time with a damp cloth, because otherwise these may cause stains that are hard to remove. Do not remove any heater components yourself. Always contact your dealer for repairs. When the power cord is damaged, it may only be replaced by an authorised fitter.
WARRANTY PROVISIONS Your heater comes with a 48-month warranty starting on the date of purchase. Within this period all defects in material or workmanship will be repaired without any charge. The following provisions shall apply regarding this warranty: We expressly dismiss all other claims for damages, including consequential damages.
Page 13
EXCHANGING THE FRONT PANEL Create your own Zibro! The Zibro SRE 25 E is supplied with an exchangeable stainless steel front panel. Design your own front panel or select a modern design! www.zibro.com...
Need help?
Do you have a question about the SRE 25 E and is the answer not in the manual?
Questions and answers