Related Manuals for Zibro SRE 270 TC
Summary of Contents for Zibro SRE 270 TC
- Page 1 SRE 270 TC MANUEL D'UTILISATION GEBRAUCHSANWEISUNG BRUGSANVISNING INSTRUCCIONES DE USO OPERATING MANUAL > ISTRUZIONI D’USO GEBRUIKSAANWIJZING INSTRUKCJA OBSŁUGI KULLANIM KILAVUZU...
- Page 3 Dear Sir, Madam, Congratulations with your purchase of the Zibro, the number one brand among movable heaters. You have purchased a first-class quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly.
-
Page 4: General Directions For Use
GENERAL DIRECTIONS FOR USE MAIN COMPONENTS Below you will find the main steps to be taken for using your Zibro. For more details, please refer to the Front plate MANUAL (pages 45 ff.). Grid Base plate Remove all packaging materials (Fig. A). -
Page 5: What You Need To Know In Advance
Only use Class C1 paraffin fuel in accordance with BS2869: Part 2, or equivalent. Your heater has been designed for use with high-quality water-free pure paraffin oil, such as Zibro Extra or Zibro Kristal. Only fuels of this kind will ensure clean and proper burning. Lower quality fuel may result in:... -
Page 6: Installing The Heater
MANUAL INSTALLING THE HEATER Carefully remove your heater from the box and check the contents. In addition to the heater you also need to have: a manual fuel pump a transportation cap a fuel cap cover these directions for use Keep the box and the packaging materials (Fig. -
Page 7: Setting The Clock
Check the removable tank fuel gauge while filling the tank (Fig. E). Stop filling by loosening the switch button on top of the pump (turn anti-clock- wise), once the gauge indicates that the tank is full. Never overfill the tank, especially not when the fuel is very cold (fuel expands when it heats up). -
Page 8: Using The Timer
The available temperature settings range from 6°C minimum to 28°C maximum. When the heater has been unplugged for more than 10 minutes (or after a power failure), the temperature will reset to the factory setting of 20°C. USING THE TIMER The timer allows you to switch on the heater automatically at a preset time. -
Page 9: Automatic Cleaning Mode
CODE INFORMATION WHAT TO DO e - 0 Temperature within the heater too high. Cool-down and re-ignite. f - 0 Power interrupted. Re-ignite the heater. e - 1 Faulty thermostat. Contact your dealer. f - 1 Faulty burner thermistor. Contact your dealer. e - 2 Starting problems. -
Page 10: Maintenance
Without the 'SAVE' setting your heater will maintain the set temperature by approximation as well, by adjusting its heating capacity. 'SAVE' is an economy setting, which you can use when, for instance, you are not present in the room or to keep it frost-free. THE 'FUEL' INDICATOR LIGHT When the FUEL indicator light lights up, there is enough fuel left for another 10 minutes of heater use. -
Page 11: Specifications
Do not remove any heater components yourself. Always contact your Zibro dealer for repairs. When the power cord is damaged, it may only be replaced by an authorised fitter. Use a new cord of the type H05 VV-F. STORAGE (END OF THE HEATING SEASON) At the end of the heating season, you must store the heater in a dust-free place, if possible in its original packaging. -
Page 12: Tips For Safe Use
We expressly dismiss all other claims for damages, including consequential damages. Any repairs or replacements of components within the term of warranty will not result in an extension of the term of warranty. The warranty shall no longer apply, when the heater has been modified, non-original parts have been used, or when it is repaired by third parties. - Page 14 +44 1606 837787 tel: +43 7434 44867 fax: +44 1606 837757 fax: +43 7434 44868 email: sales@scottmail.co.uk email: pvgaustria@zibro.com > ITALIA e BELGIË PVG Italy SRL PVG Belgium NV/SA Via Niccolò Copernico 5 Industrielaan 55 50051 CASTELFIORENTINO (FI) 2900 SCHOTEN tel:...
Need help?
Do you have a question about the SRE 270 TC and is the answer not in the manual?
Questions and answers