Page 1
SRE 237 E MANUEL D'UTILISATION GEBRAUCHSANWEISUNG BRUGSANVISNING INSTRUCCIONES DE USO KÄYTTÖOHJE OPERATING MANUAL > ISTRUZIONI D’USO BRUKSANVISNING GEBRUIKSAANWIJZING BRUKSANVISNING NAVODILA ZA UPORABO...
Page 2
AFNOR CERTIFICATION - 11, RUE FRANCIS DE PRESSENSE 93571 LA PLAINE SAINT-DENIS CEDEX FICHE INFORMATIVE PRINCIPALES CARACTERISTIQUES CERTIFIEES: CONSEILS D’UTILISATION ET D’ENTRETIEN PVG International B.V.
Page 3
Dear Sir, Madam, Congratulations with your purchase of the Zibro, the number one brand among movable heaters. You have purchased a first-class quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly.
• Fuel ages. Use new fuel at the start of every heating season. • The use of Zibro Extra, Zibro Kristal or Zibro Bio as a heating fuel assures you that you have a good quality fuel. • Before changing brands and/or types of fuel make...
Obtain proper information on this in advance. Your Zibro heater has been designed for use with high-quality water-free pure paraffin oil, such as Zibro Extra or Zibro Kristal. Only fuels of this kind will ensure clean and proper burning. Lower quality fuel may result in:...
Page 6
Damage and/or malfunctions of the heater due to the use of other than high quality water-free pure paraffin oil is not covered by the warranty. Always refer to your local Zibro dealer for the right fuel for your heater. MANUAL Carefully remove your Zibro from the box and check the contents.
Page 7
Fill the removable tank in a suitable place since there can always be some spillage. Follow the procedure below: Make sure that the heater is switched off. Open the upper lid and lift the removable tank out of the heater (Fig. B). Note: Some drops may leak from the tank.
Page 8
The temperature setting can only be adjusted, when the heater is burning. Use the adjustment keys to adjust the temperature. First press either of the two keys to switch on the function (the °C mark and 4-digit ¹ will start blinking). Next, adjust the temperature using the key ( min.) to set the temperature to a higher setting and the key ( hour) to lower the temperature.
Page 9
The information display ¹ not only serves as an indicator of the (set) time and temperature (Sections C, E, and F), it also indicates any malfunctioning of the heater. The code on the information display tells you what is the matter: e - 0 Temperature within the heater too high.
Page 10
Switch off the heater and let it cool down, before you start any maintenance work. Also disconnect the plug from the mains. Your Zibro needs hardly any maintenance. It is, however, important that you clean the air filter and the vent...
Page 11
We recommend that you remove dust and stains in time with a damp cloth, because otherwise these may cause stains that are hard to remove. Do not remove any heater components yourself. Always contact your Zibro dealer for repairs. When the power cord is damaged, it may only be replaced by an authorised fitter.
Page 12
Your heater comes with a 48-month warranty starting on the date of purchase. Within this period all defects in material or workmanship will be repaired without any charge. The following provisions shall apply regarding this warranty: We expressly dismiss all other claims for damages, including consequential damages.
Page 14
Jos haluat huoltoapua, lisätietoja tai laitteen kanssa tulee ongelmia, tutustu verkkosivustoon osoitteessa www.zibro.com tai kysy neuvoa PVG kuluttajapalvelukeskuksesta (www.zibro.com). If you need information or if you have a problem, please visit the our website (www.zibro.com) or contact our sales support (you find its phone number on www.zibro.com) Per informazioni e in caso di problemi, visitate il sito Web www.zibro.com oppure contattate il Centro Assistenza Clienti (per conoscere il numero...
Need help?
Do you have a question about the SRE 237 E and is the answer not in the manual?
Questions and answers