At The End Of The Programme - Zanussi F 802 V Instruction Booklet

7. At the end of the programme

The machine stops automatically.
If you have selected a programme which ends with
the water of the last rinse left in the tub (option ),
drain the water before opening the door. Select
programme "N" (drain) or select position on the
spin speed selector dial.
To drain and spin turn the spin speed selector dial to
the max. spin value: the machine will spin at the
max. spin provided for the selected programme.
Wait one or two minutes before opening the door to
give the electric locking mechanism time to release
it.
Depress the ON/OFF button again to switch the
machine off. The mains on light goes out.
Remove the laundry.
Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being
damaged in a subsequent wash (e.g. shrinking) or
their colour running into a load of whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
15