–
One-handed operation on/off: Allows you to operate the device
with one hand.
Personalizing the Call Sound Setting
During a call it may be necessary to adjust the sound of the
incoming call by selecting an audio equalizer setting for the
current call.
1. From the call screen, tap
2. Confirm the option is enabled
3. Select an available option. Choose from: Off, Soft
sound, Clear sound, and Adapt Sound left, or Adapt
Sound right.
Activating Noise Reduction
During a call it may be necessary to activate the noise
reduction feature. Activating this feature can improve the
quality of your conversation by reducing ambient noise. Noise
reduction in on by default.
1. Press
to turn Noise reduction off.
2. Press
to turn Noise reduction on.
.
.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap Hold
the current caller on hold.
2. You can later reactivate this call by tapping Unhold
.
Unhold
To make a new call while you have a call in progress
1. Tap Hold
.
Hold
2. Tap Add call
to display the dialer.
3. Enter the new number and tap
Once connected, the active call will appear in a large
box at the top of your screen and the call on hold will
appear in a smaller box in the middle of your screen.
Switching Between Calls
When you have an active call and a call on hold, you may
switch between the two calls, changing the one on hold to
active and placing the other on hold.
1. Tap Swap.
. This action places
Hold
.
Call Functions
43