Specifications - Sekonic DIGI MASTER L-718 Operating Instructions Manual

Specifications

Measuring system :
Measuring range :
Repeat metering
accuracy
Calibration constants : C=340 K=12.5 (for Lumidisc : C=250)
Light receiving part
Sensor:
Swivel head :
Attachments :
Display
Measuring mode :
Film speed :
Shutter speed :
f/stop :
EV scale :
Other display :
Display illumination : Electro Luminescence ("ECLAT" manufactured by Elix Co.,
Power Bourse :
Standard accessories : Lumisphare, Lumidisc, Reflected-light filter, neck strap,
Dimensions and
weight :
28
Incident and reflected light type for both flash and ambient
light
f/1.4 ~ f/90+0.9AV / ISO 100 (for flash light)
EV(-)1 ~ EV19.9 / ISO 100 (for ambient light
measurement)
± 0.1 EV
Silicon Photodiode
270° horizontally and 90° upward rotatable
Lumisphare and Lumidisc for incident light, Reflected-light
filter (acceptance angle 54°) and Viewfinder 5° (sold
separately)
Wired and wireless measurements for flash light, wired and
wireless cumulative flash measurements, ambient light
measurement, cine scale and EV measurement
ISO 3 ~ 8000 at 1/3 SV unit
1sec. ~ 1/500sec. for flash light
30min. ~ 1/8000sec. for ambient light
cine scale : 8, 16, 18, 24, 32, 64 and 128fps.
1.4 ~ 90+0.9AV for flash light
1.0 ~ 90+0.9AV for ambient light
(-)6 ~ 25.9
E.u. (underexposure), E.o. (overexposure) and battery
check
Ltd., subsidiary of Sekonic)
2 x AA pen light battery (1.5V x 2)
2 batteries and case
157 68 28mm
x x
about 190 grams (excl. batteries)