Candy CNWD 136 Instructions For Use Manual page 5

The option buttons should be selected before pressing
the "Start/Pause" button.
SLOW SPIN button
The machine gradually increases the final spin speed to the maximum possible speed.
The button reduces spin speed to 600 r.p.m.
Note: this model is fitted with an electronic device that
checks the load is balanced correctly. If the load is
slightly unbalanced the machine will re-balance it
automatically to carry out the normal spin.
If, after several attempts, balance is not restored, a
reduced spin speed will be used.
If loads are seriously unbalanced the spin stage will be
cancelled.
This helps limit vibration, reduce noise output and
improve the washing machine's lifespan.
QUICK WASH button
Press the button to select or deselect this function.
Pressing this button reduces the time of the wash programme by a maximum of 50 minutes
depending on the programme and the temperature selected. The "Quick Wash" button can
be used for washing loads of 1 to 6 kg. This option may only be utilised on COTTONS and
SYNTHETICS programmes.
8
RINSE HOLD button
Press the button to select or deselect this function.
Pressing this button, which operates only during delicates, hand wash and wool cycles,
means the cycle stops at the final rinse stage, leaving the drum filled with water.
D
The garments thus stay immersed in the water, preventing them from bunching up and
forming creases that are difficult to remove.
During the phase in which the water is held in the tub, the indicator lights to show that the
machine is at a standstill.
When you are ready to unload, press the "Rinse Hold" button, this will drain and spin ready
for emptying.
If you do not want to spin the clothes and activate drain only:
- Turn the programme selector to the "OFF" position;
- Select programme drain only
- Switch on the appliance again by pressing the "Start/Pause" button.
TIME TO END indicator light
In order to manage your time better, this washing machine features an indicator light system
that keeps you constantly informed on the remaining cycle time.
Indicator light 90:
Remaining time above 60 minutes.
Indicator light 60:
E
Remaining time less than 60 minutes.
Indicator light 30:
Remaining time less than 30 minutes.
Indicator light 15:
Remaining time less than 15 minutes.
Indicator light STOP:
End of the programme.
Buttons indicator light
The indicator light around the option buttons will light when specific options are selected.
;
9
F
L
M