FOOTSWITCH
(30) CABLE CONNECTOR
This 7-pin DIN connector is provided for connecting the footswitch to
the amplifier REMOTE SWITCH (20) via the cable included in the carton.
Connections at the switch and the amplifier should be made before the
amp is powered up.
(31) Lead / Rhythm SELECTOR
This switch selects between the Rhythm and Lead channels on the ampli-
fier. The adjacent LED will illuminate when the Lead/Lead channel is
selected. When the LED is dark, the Rhythm/Rhythm channel is select-
ed. The CLEAN SELECTOR (32) must be in the BYPASS mode to activate
either the Rhythm or Lead channel.
(32) CLEAN SELECTOR
This switch selects the Clean channel and will activate regardless of
the position of the Lead / Rhythm SELECTOR (31). The adjacent LED will
illuminate when the Clean channel is selected. This switch must be in
the BYPASS position, indicated by a dark LED, in order to utilize the Lead
/ Rhythm SELECTOR (31).
(33) EFFECTS SELECTOR
This switch activates the amplifier's effects loop (16 – 19). The adjacent
LED will illuminate when the effects loop is active.
31
30
32
9
33