20
Using the DSP8000
Adjusting the volume
loudspeakers
The DSP8000 loudspeakers adjust the volume in
precise steps of 1dB, where 9dB is equivalent to
doubling the loudness, and can be varied in the range
1 to 99dB.
When you first connect power to the DSP8000
loudspeakers the volume is set to 65, which is similar
to the midway position of the rotary volume control on a
conventional preamplifier.
To change the volume
•
Press the A or V volume keys on the remote.
As you adjust the volume setting the display
will show the current volume level.
For example:
To mute the sound
•
Press Mute on the remote.
The display will show:
To restore the sound
Press Mute again on the remote.
•
Alternatively, the sound will be restored if you adjust the
volume.
Radio 55
Muted