Oricom WNS1 User Manual page 8

ALARM AND CLOCK FUNCTION
When the alarm is set to one of the alarm modes, the
alarm indicator will appear on the display near the
inscription AL.
The table below shows how the alarm modes indicate an
incoming call from the alarm clock.
ALARM MODE
SOUND
SHAKER
STROBE LIGHT
SNOOZE BUTTON
When the alarm sounds, you can use the
to temporarily turn off the alarm. The alarm will come on
again after 9 minutes. This sequence can be carried out
for up to 2 hours after which the alarm mode will be
automatically switched off.
SWITCHING THE ALARM OFF
Press the alarm off button (OFF), the alarm will them
operate at the same time the next day. The alarm if not
switched off will continue to sound for up to 2 hours and
then be automatically switched off.
ACTION
Buzzer
Vibrates
Flashes
/ STROBE LIGHT
- 6 -
ALARM C LOCK
Continuous
Continuous
Continuous
INCOMING C ALL
With pauses
With pauses
With pauses
snooze button