Hasbro Star Wars The Force Unleashed Lightsaber 87436 Instruction Manual

x3
1.5V AA/R6 size
NOT INCLUDED
BATTERIES REQUIRED
Alkaline batteries recommended.Phillips/cross
head screwdriver (not included) needed to
insert batteries.
Press button to reveal Sith spikes. Blade color
will change to red when spikes are extended.
Note: If during play the spikes become out of alignment, the spring-open
feature will not work properly. To reset the feature:
1. Manually adjust all the spikes so that they are all in the fully open position.
2. Manually close the spikes (moving one spike will cause all to move at the
same time).
3. Press the button; the spikes should open again with their normal function.
P/N 6844080000
THE FORCE UNLEASHED LIGHTSABER
Press button to activate sounds
and light. Light will be green
when spikes are closed.
To replace baTTeries:
Using a Phillips/cross head screwdriver (not included), loosen screw in
battery compartment door (screw remains attached to door). Remove door.
Insert 3 x 1.5V "AA" or R6 size batteries. Alkaline batteries recommended.
Replace door and tighten screw.
Flick wrist to extend blade.
Note: Color-changing
feature works at
optimal efficiency
only when spikes are
functioning normally.
Product and colors may vary.
© 2007 Lucasfilm Ltd. & ® or TM
where indicated. All rights reserved.
®* and/or ™* & © 2007 Hasbro,
Pawtucket, RI 02862 USA. All Rights
Reserved.
TM & ® denote U.S. trademarks.
* *
4
+
AGES
™ 87436
Not suitable for children
under 3 years because of
small parts — choking hazard.