Meat, fish and milk should be put in the coldest part of the cabinet. The temperature will be affecteed by: · How often the door is opened · How much food is stored · Position of the appliance (See chapter Installation) Zanussi 818 14 55-01/8...
They are required for proper air circulation inside the cabinet. Shelves with a raised edge should be placed with the raised edge facing the rear wall of the cabinet, and thus prevent food products from touching the cooling plate. Zanussi 818 14 55-01/8...
Frost formation can be prevented · not putting warm foodstuff inside the cabinet. · avoiding frequently opening the door or keeping it open too long. · do not place foodstuffs directly against the cold cooling plate. Zanussi 818 14 55-01/8...
Use a bulb of the same type, E14 socket, maximum rating of 25 W. When the appliance is not in use Disconnect the appliance from electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells. Zanussi 818 14 55-01/8...
If the cushion spacers (between the cabinet wall and pipes) come loose, put them back in place again. Carefully follow the instructions in the chapter "Installing the cabinet". Guarantee Conditions See Guarantee Conditions on the Registration Card. Zanussi 818 14 55-01/8...
It is possible to have the door decorated with a panel. The panel and the frames for assembling can be ordered separately from Your dealer. Cleaning Wash the inside of the cabinet using lukewarm water, a mild washing-up detergent and a soft cloth. Zanussi 818 14 55-01/8...
Electrical connection Connect the cabinet to a grounded electrical outlet. Voltage: 230 V. Fuse: 10 A. Refer to the rating plate on the left inside the cabinet. Zanussi 818 14 55-01/8...
Then press the supplied plastic plugs into the holes to which the handle was previously fitted. 7. Put the cabinet in position. Check that it stands straight. See the section "Positioning the cabinet". Zanussi 818 14 55-01/8...