Operating Sequence - Zanussi FLS872V Instruction Booklet

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main
wash compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main wash
compartment . If you wish to carry out a
prewash, pour detergent into the appropriate
compartment marked
3. Measure out the additives
If required, pour fabric softener into the
compartment marked
into the compartment marked
exceeding the «MAX» mark.
4. Select option
the spin speed
32
.
and the bleaching agent
without
if desired and
P0004
P0444
P0445
450