Samsung 4000 Series User Manual page 12

Display Modes (O-Sub and HOMI/OV/lnput)
Optimal resolution is 1360 x 768@60Hz. You can also select one of the standard resolutions listed in the Resolution column.
The lY will automatically adjust to the resolution you choose.
Resolution
Horizontal Frequency
Vertical Frequency (Hz)
Pixel Clock Frequency
Sync Polarity (HIV)
(kHz)
(MHz)
640 x350 31.469
"
70.086 25.175
+
f-
IBM
720 x 400 31.469
70.087'
28.322 -f+
640 x 480 35.000 66.667 30.240
- f -
MAC
832 x 624 49.726 74.551 57.284
- f-
31.469 59.940 25.175 - f-
640 x 480
37.861 72.809
31.500
-f-
37.500 75.000 31.500 -f-
37.879 60.317
40.000
+f+
800 x 600 48.077 72.188 50.000
+f+
VESADMT
46.875 75.000 49.500 +f+
48.363 60.004 65.000
-f-
1024
x
768 56.476 70.069 75.000
-1-
60.023 75.029 78.750 +f+
1360 x 768 47.712 60.015 85.500 +f+
~NOTE
• For HOMI/OVI cable connection, you must use the HOMIIN 1 (DVI) jack.
• The interlace mode is not supported.
• The set might operate abnormally if you select a non-standard video format.
• Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
EX-LINK
Connector for service only.
SOURCE
Source
How to use Edit Name
Edit Name lets you associate a device name to an input
source. To access Edit Name, press the TOOLS button In
Source. The following selections appear under Edit Name:
• VCR I DVO / Cable STB I Satellite STS I PVR STB /
AV Receiver I Game / Camcorder I PC I OVI PC I OVI
Devices / TV / IPTV I Blu-ray I HO OVO / OMA: Name
the device connected to the input jacks to make your
input source selection easier.
~
if you have connected a PC to the HDMIIN 1 (DVI)
port with an HOM! cable. select PC under Edit Name
to enter a device name.
~
if you have connected a
PC
to the HDMIIN 1 (DVll
port with an HOMI to DVI cable, select OVI PC under
Edit Name to enter a device name.
~
if you connected an AV device to the HOMIIN 1 (OVI)
port with an HOMI to DVI cable. select DVI Devices
under mode under Edit Name to enter a device name.
Information
You can see detailed information about the selected external
device.
Use to select lY or an external input sources such as a DVD
I Blu-ray player I cable box I STS satellite receiver.
1. Press the SOURCE button.
2. Select a desired external input source.
• TV I Component / PC / HOMI11
DVI / HOMI21 HOMI3 / HOMI4 / AV
/USB
~
You can only choose external
devices that are connected to the TV.
In the Source, connected inputs will
be highlighted.
~
If you want to see connected devices only, move to
Connected using ~ or ~ button.
~
PC always stay activated.
~
If the connected external devices are not highlighted.
press the red button. The TV will search for connected
devices.