WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom enclosure of the apparatus.
Page 3
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer.
CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to • disassemble the casing. Stop operation immediately if any liquid or solid object should fall into the cabinet. •...
LOCATION OF CONTROLS 1. Volume Control 12. Dial Scale 2. Function Switch (CD/Off/Radio) 13. Repeat Indicator 3. AUX IN Jack 14. LED Display 4. Repeat (REP) Button 15. Program/Play Indicator 5. Program (PROG) Button 16. Tuning Control 6. Speakers 17. Band Selector (AM/FM/FM Stereo) 7.
Page 6
IMPORTANT NOTES Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Dusty places. • Places subject to constant vibration. • Humid or moist places. • POWER SOURCES This unit operates on 120V~ 60Hz or 8 x DC1.5V “C”...
CD OPERATION NOTE: This unit not only plays commercial compact discs but also self-complied CD-RW discs. Because of non-standardized format definition/production of CD-R/RW, playback quality & • performance is not guaranteed. Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as •...
All). You may also tap SKIP FORWARD "" BUTTON to go directly to other tracks ahead during program play but you cannot use SKIP BACKWARD "" BUTTON to go back to previous track(s). To review/edit the programmed tracks during play, press the STOP BUTTON and then the PROGRAM BUTTON, the LED DISPLAY will automatically show the programmed tracks one by one in their correct sequence starting from the first.
TROUBLESHOOTING GUIDE Symptom Possible Cause Solution Noise or sound distorted - Station not tuned properly for AM or - Retune the AM or FM broadcast on AM or FM broadcast station. - FM: FM telescopic antenna is not - FM: Extend FM telescopic antenna. extended.
Need help?
Do you have a question about the NPB-237 and is the answer not in the manual?
Questions and answers