Cleaning The Filters; The Drain Filter - Zanussi FLS 821 C Instructions Manual

Cleaning the filters

The drain filter

A clean filter is important for correct functioning
of the washing machine, and it should therefore
be cleaned regularly. Small objects left in the
pockets and yarn is retained here.
AL010
AL012
Unscrew the filter completely turning it
counterclockwise.
Remove the filter and clean it under a fast
running tap.
Replace the filter turning now clockwise and
tighten it.
AL011
P0040
Attention
Never remove the unloading filter while the
washing machine is operating. Wait, always, till
the washing program is over and there is NO
WATER IN THE BARREL.
When you replace the unloading filter in its
place, make sure that it is correctly positioned
and tight, in order to avoid water leakage or
removal by children.
The water inlet hose filter
If it takes longer to fill up the washing machine it
is time to check the water inlet hose filter which
may be clogged. Turn off the water tap. Unscrew P0090
the fixing nut of the inlet hose. Remove the filter
from the electrovalve and clean it with a hard
bristle brush and replace it. Screw on the nut
tightly.
P0021
34