Operating Sequence - Zanussi FLS 804 X Instruction Booklet

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additives
If required, pour fabric softener into the compartment
marked , and bleach into the compartment
marked without exceeding the «MAX» mark.
P0432
.
.
P0433
4. Select the temperature
Turn the dial to the required setting.
P0345
5. Select the required option
Depress spin speed reduction
and/or intensive rinse
button, if desired.
6. Select the programme and start
the machine
Turn the programme selector dial clockwise to the
required programme and pull it outwards: the mains
on light comes on and the machine starts to operate.
P0215
34
and/or half load
or anti-crease
P0216