Wireless Blu-ray Disc Player Contents Important safety instructions..............3 Introduction....................4 Features ....................4 Setting up your player................11 Using your player ..................17 Using the Settings menu.................24 Upgrading your player’s firmware ............43 Maintaining ....................45 FAQ (frequently asked questions)............47 Error Messages (firmware update) ............47 Troubleshooting..................48 Specifications..................52 Legal notices ...................54 One-year limited warranty..............57...
Wireless Blu-ray Disc Player The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature that came with your player. This symbol is the symbol for CLASS II (Double Insulation).
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Introduction Congratulations on your purchase of a high-quality Dynex product. Your Wireless Blu-ray Disc Player represents the state of the art in Blu-ray Disc player design and is designed for reliable and trouble-free performance.
Wireless Blu-ray Disc Player • WiFi wireless connectivity for ease of connection. • Deep Color: This BD player is capable of sending “deep” (36-bit) color over HDMI if the TV supports it. Please consult the owner's manual of your TV for more information. •...
Page 6
DX-WBRDVD1/DX-WBRDVD1-CA • Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches, or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. • CD-R/-RW, DVD-RAM/RW/-R recorded with UDF or ISO9660 format can be played back.
Page 7
Wireless Blu-ray Disc Player Front DX-WBRDVD1 Item Description Insert a disc with the label side up into this tray. To open or close the Disc tray tray, press (open/close). Receives signals from the remote control. Do not block. Remote control sensor Press to open or close the disc tray.
Page 8
DX-WBRDVD1/DX-WBRDVD1-CA Back Item Description Plug the power cord into a power outlet. Power connector Connect an ethernet cable to this jack and to a broadband Internet jack to ETHERNET jack access BD-Live information or run connected applications. WIFI antenna Connects player wirelessly to your wireless network.
Wireless Blu-ray Disc Player Remote control Item Description Press to turn on your player or put your player in standby mode. When your player is in standby mode, power is still entering your player. To disconnect power, unplug the power STANDBY/ON cord.
Page 10
DX-WBRDVD1/DX-WBRDVD1-CA Item Description Press to fast forward. Each time you press this button, the fast-forward speed increases from Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press...
Wireless Blu-ray Disc Player Item Description Press to go to the previous title, chapter, or track. See “Controlling Blu-ray Disc or DVD (previous) playback” on page 17. Press to begin playback. See “Controlling Blu-ray Disc or DVD playback” on page 17. (play) Press to advance one frame at a time.
Page 12
DX-WBRDVD1/DX-WBRDVD1-CA Replace the battery compartment cover. Notes: • Make sure that you insert the batteries correctly. • Do not heat, open, or short-circuit batteries. • Do not throw batteries into a fire. • Do not mix different types of batteries or mix old and new batteries.
Wireless Blu-ray Disc Player Connecting a TV using an A/V cable (good) To connect a TV using an AV cable: • Connect an A/V cable to the VIDEO OUT and AUDIO OUT L/R jacks on the back of your player and to the VIDEO IN and AUDIO IN L/R jack on the TV. Jacks and cable connectors are usually color-coded.
DX-WBRDVD1/DX-WBRDVD1-CA Navigating the on screen menus To navigate the on screen menus: Press ENTER or to open the menus. Press or RETURN to close the menus. Press to select the desired menu item. Connecting to your home network Note: This player can be connected to your wired network using the Ethernet port on the back of your player or by using a wireless network.
Page 15
Wireless Blu-ray Disc Player Press to select Network List, then press ENTER. The Network List screen opens, showing a list of available wireless networks. Network List Hartleys Steven Linsys Press to select the wireless network you want your player to connect to, then press ENTER.
Page 16
DX-WBRDVD1/DX-WBRDVD1-CA Connecting using a wired network Another connection option is to use a wired router as shown in the example below. To connect to the ethernet with a wired network: Connect a network cable to the INTERNET jack on the back of your player and into a wired router using a commercially available LAN or Ethernet cable (Cat 5 or better, with RJ45 connectors).
Wireless Blu-ray Disc Player • Dynamic—Uses DHCP to automatically obtain an IP address. • Manual—Lets you manually configure network settings, such as IP address, subnet mask, and gateway settings. If you select Manual, the following screen opens. Enter the IP information here.
Page 18
14. 2. Have a valid account to these services. You should contact the partner company (not Dynex) if you experience an issue using one of these applications. Note: A particular connected service may not be available in the country in which you live.
Page 19
Pandora. Select I am new to Pandora from the options. You will receive an activation code. On your PC, go to www.pandora.com/dynex and enter the activation code from Step 2, then click Activate. Click Create a Pandora Account and follow the on-screen instructions.
Page 20
DX-WBRDVD1/DX-WBRDVD1-CA Using BD-Live Some BD discs contain additional features that are made available to players that are connected to the Internet and have an additional USB memory stick added. These additional features may include things like: • The ability to download new movie trailers.
Wireless Blu-ray Disc Player Playing files on a data disc or USB memory stick When you insert a data disc or USB memory stick containing picture, music, or video files into your player, icons are added to the menu to indicate that video, music, or picture files are available for playback.
DX-WBRDVD1/DX-WBRDVD1-CA Playing an audio CD To play an audio CD: Press Press to open the disc tray. Place a CD on the disc tray with the label facing up, then press to close the disc tray. It may take a few seconds for the CD to load.
Wireless Blu-ray Disc Player Using PIP (Picture In Picture) mode Some Blu-ray Discs are compatible with Picture In Picture (PIP) mode. In PIP mode, the primary video is displayed on the full screen, and the secondary video is displayed in a small window. Primary video Secondary video See the documentation that came with the disc for playback instructions.
DX-WBRDVD1/DX-WBRDVD1-CA Using the Settings menu The settings menu is displayed on the screen automatically under No Disc or Stop situations. To use the Settings menus: Press ENTER on the remote control. The Settings menu opens. System Display Network HDMI Status...
Wireless Blu-ray Disc Player Press to select Language. The Language menu opens. BD-Live Language Display English Audio Menu Auto Audio Auto Settings Language Subtitle None Parental System Network Press , then press to select Menu, then press ENTER. Press to select the language you want, then press ENTER. Notes: Not all languages are available on all discs.
DX-WBRDVD1/DX-WBRDVD1-CA Selecting the subtitle language To select the subtitle language: Press ENTER. The Settings menu opens. Press to select Language. The Language menu opens. BD-Live Language Display English Audio Menu Auto Audio Auto Settings Language Subtitle None Parental System Network Press , then press to select Subtitle, then press ENTER.
Wireless Blu-ray Disc Player Automatically determining the best HDMI resolution To automatically determine the best HDMI resolution: Press ENTER. The Settings menu opens. System Display Network HDMI Status Connected HDMI preferred Format 1080P BD-Live Resolution HDMI Auto Settings Display TV Aspect 16:9 Original Film Mode(1080p24) Audio...
DX-WBRDVD1/DX-WBRDVD1-CA - Only the HDMI output on your player supports 1080p video output at any frame rate. If the TV is connected to the component output, the video output is limited to 1080i or lower. Press to go to the previous menu.
Wireless Blu-ray Disc Player Aspect ratio option Example 4:3 Letter Box Select this when you want to see the total 16:9 ratio screen a Blu-ray Disc or DVD provides, even though you have a TV with a 4:3 aspect ratio screen. Black bars appear at the top and bottom of the screen.
DX-WBRDVD1/DX-WBRDVD1-CA To select Deep Color: Press ENTER. The Settings menu opens. System Display Network HDMI Status Connected BD-Live HDMI preferred Format 1080P Resolution HDMI Auto Settings Display TV Aspect 16:9 Original Film Mode(1080p24) Audio Deep Color Auto Language Parental Press ENTER.
Wireless Blu-ray Disc Player Selecting the digital audio output mode To select the digital audio output mode: Press ENTER. The Settings menu opens. System Display Network HDMI Status Connected HDMI preferred Format 1080P BD-Live Resolution HDMI Auto Settings Display TV Aspect 16:9 Original Film Mode(1080p24) Audio...
DX-WBRDVD1/DX-WBRDVD1-CA To turn dynamic range control on or off: Press ENTER. The Settings menu opens. System Display Network HDMI Status Connected HDMI preferred Format 1080P BD-Live Resolution HDMI Auto Settings Display TV Aspect 16:9 Original Film Mode(1080p24) Audio Deep Color...
Wireless Blu-ray Disc Player Enter the default password (0000). If you forget your password, reset your player to the factory defaults. The password is reset to 0000. For more information, see “Resetting settings to the factory defaults” on page 37 Press to go to the previous menu.
DX-WBRDVD1/DX-WBRDVD1-CA Setting the parental control level To set the parental control level: Press ENTER. The Settings menu opens. System Display Network HDMI Status Connected HDMI preferred Format 1080P BD-Live Resolution HDMI Auto Settings Display TV Aspect 16:9 Original Film Mode(1080p24)
Wireless Blu-ray Disc Player Press to select Parental Password, then press ENTER. The New Password screen opens. Enter the 4-digit password of your choosing. Press to select Ok, then press ENTER. Press to go to the previous menu. Changing the System settings Setting automatic disc playback mode To set automatic disc playback mode: Press ENTER.
DX-WBRDVD1/DX-WBRDVD1-CA Setting Auto Power Down Auto Power Down automatically turns the player off if no settings are changed after a selected period of time (5, 10, 20, or 30 minutes). To set the Auto Power Down: Press ENTER. The Settings menu opens.
Wireless Blu-ray Disc Player Press , then press to select Update Via Network, then press ENTER. Follow the on-screen instructions for updating the software. Press to go to the previous menu. Resetting settings to the factory defaults This option resets all settings and deactivates the connected applications. The parental control password is reset to 0000.
Page 38
DX-WBRDVD1/DX-WBRDVD1-CA Press to select System. The System menu opens. Audio System Language Optical Disc AutoPlay Enable Screen Saver Duration 5 Minutes Parental Auto Power Down 20 Minutes InLink Settings System Update Via Network Restore factory defaults Network System Information BD-Live...
Wireless Blu-ray Disc Player Press , then press to select BD-Live Storage, then press ENTER to check the BD-Live Storage. Press to go to the previous menu. Erasing BD-Live storage To erase BD-Live storage: Press ENTER. The Settings menu opens. Press to select BD-Live.
DX-WBRDVD1/DX-WBRDVD1-CA Press to select Network. Language Network Parental Interface Wired Link Up Link Status System MAC Address 00:22:84:FB:C6:05 IP Mode Dynamic Settings Network IP Address 192.168.42.119 255.255.255.0 Subnet Mask Gateway 192.168.42.1 BD-Live Primary DNS 202.96.128.166 Secondary DNS 10.4.4.11 Display Audio Press ENTER.
Page 41
Wireless Blu-ray Disc Player Press to select Network List, then press ENTER. The Network List screen opens, showing a list of available wireless networks. Network List Hartleys Steven Linsys Press to select the wireless network you want your player to connect to. A Network Setup screen opens with the following options: •...
Page 42
DX-WBRDVD1/DX-WBRDVD1-CA Press , then press to select WiFi Protected Setup (WPS), then press ENTER. A screen appears, asking you to press the button on your router. WIFI Protected Setup (WPS) Please press the button on your router now Cancel Press the button on top of your router. A screen should appear on your TV that says “Success”...
Wireless Blu-ray Disc Player Press to select Network, then press ENTER. Language Wireless Parental Network List System WiFi Protected Setup(WPS) Settings Network Manual BD-Live IP Settings Display Network Test Audio Press to select Network Test, then press ENTER. Network Test runs three tests. •...
Press CANCEL to exit with no update. Player current version: PKG_DVD_3_3_003_RC_02_BestBuy Update version: PKG_DVD_3_3_003_RC_02_BestBuy Upgrade for DYNEX DX-WBRDVD1 BD Player Cancel • The software begins downloading and a status bar appears on the TV screen, similar to what is shown below: Update in progress, time remaining:...
After a short period of time, a screen similar to the one below appears. Below, select Ok to proceed with the update or Cancel to abort, then press the Enter key Player model DYNEX DX-WBRDVD1 BD Player Player current version: PKG_DVD_3_3_003_RC_02_BestBuy...
DX-WBRDVD1/DX-WBRDVD1-CA • In an area with a temperature over 104°F (40°C) or humidity over 90% • Dirty places • In an area with direct exposure to sunlight • Do not install this equipment in a confined space such as a book case or similar unit. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, or curtains.
Wireless Blu-ray Disc Player Cleaning discs • Before playback, wipe the disc outwards from the center (not in a circle) with a clean cloth. FAQ (frequently asked questions) Question Answer What do I need to play Connect the appropriate amplifier/receiver to the HDMI jack or the DIGITAL AUDIO multi-channel surround sound? OUT jack (COAXIAL).
DX-WBRDVD1/DX-WBRDVD1-CA Error Code Explanation 10000-10099 The BD player was not able to connect to the update server, or no update file was available. 11000-11099 The BD player was not able to connect to the update server, or no update file was available.
Page 49
Wireless Blu-ray Disc Player Operation Problem Solution Remote control does not • Make sure that you are pointing the remote control at the remote control sensor on work the front of your player. • Make sure that there are no obstructions between the remote control and the remote control sensor on the front of your player.
DX-WBRDVD1/DX-WBRDVD1-CA Problem Solution The player freezes when • Reset your player. For instructions, see “Resetting your player” on page 48. When reading a disc you see “loading” on the screen, press (open/close) to open the disc tray and remove the disc. Clean the disc. (For instructions, see “Cleaning discs” on page 47), then try the disc again.
Wireless Blu-ray Disc Player BD-Live and USB connections Problem Solution Cannot connect to or access • Make sure that the BD-Live Disc you are using is a legal copy. BD-Live content • Make sure that the USB memory stick is connected correctly and securely, has at least 1 GB capacity, and is formatted FAT32.
• Some discs do not support the resume function. BD-Live technical notes • The Dynex player only supports the connection of USB memory in order to fulfill the Blu-ray Disc Profile 2.0 or “BD-Live” requirement for 1 GB of free, available storage. An externally connected drive becomes the default storage for BD-Live content and the internal storage ignored.
Wireless Blu-ray Disc Player System and outputs TV signal system NTSC Video output Electric level output: 1.0 Vp-p Resistance: 75 ohms Output connector: Pin jack (1 system) Audio output (analog) Output level: 2 Vrms (1 kHz, 0 dB) Output connector: Pin jack Number of connectors: 2-channel (1) Audio output (digital) Coaxial digital output (pin jack) (1)
DX-WBRDVD1/DX-WBRDVD1-CA MP3/WMA audio file requirement (USB/DISC) • File extensions: .mp3, .wma • Sampling frequency: Within 8 to 48kHz (WMA), within 11 to 48kHz (Mp3) • Bit rate: Within 8-320kbps (WMA, Mp3) • CD-R/RW, DVD R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF Bridge format •...
Wireless Blu-ray Disc Player Canada ICES-003 statement This Class B digital apparatus complies with Canadian ICES-003. 1. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic ally radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Dynex. Disclaimer This Dynex product may contain content and/or services that belong to a third party. Such third party content and/or service may only be used in compliance with the terms and conditions that govern such use. Unless expressly authorized by the applicable third party’s terms of use, you may not modify, copy, republish, upload,...
If service of products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the Warranty Period.
Need help?
Do you have a question about the DX-WBRDVD1 and is the answer not in the manual?
Questions and answers