Operating Sequence - Zanussi FL 984 CN Installation And Instruction Manual

i

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door by depressing button
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into
the main wash compartment
out a prewash, pour detergent into the appropriate
compartment marked
3. Measure out the additive
If required, pour fabric softener into the compartment
marked without exceeding the «MAX» mark.
4. Select the desired option(s)
Depress the required button(s).
5. Select the temperature
Turn the selector dial to the required temperature
setting.
64
.
. If you wish to carry
.
with
P0004
C0005
C0004
M0027