Operating Sequence; Place The Laundry In The Drum; Measure Out The Detergent; Measure Out The Additives - Zanussi FL 726 CN Instruction Booklet

i

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main
wash compartment and start up the machine.

1. Place the laundry in the drum

Open the door by depressing button .
Place the laundry in the drum, one item at a
time, shaking them out as much as possible.
Close the door.
P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main wash
compartment . If you wish to carry out a
prewash, pour detergent into the appropriate
compartment marked .
C0005 C0004

3. Measure out the additives

If required, pour fabric softener into the
compartment marked without exceeding the
«MAX» mark.
4. Select the desired option(s)
Depress one or more buttons; depending on the
selected programme.

5. Select the temperature

Turn the selector dial to the required
temperature setting.
M0027
14