Huawei E960 User Manual page 8

Signal strength
Network mode
ON/ OFF
Interfaces
Power adap ter/USB cable interface: When connected with the power adapter, the E960
functions a s a wireless gateway. When connected to the PC with a USB data cable, the
E9 60 functions as a USB modem.
Eth ernet cable interface: Insert an Ethernet cable connected to the PC or other network
equip ments.
Ph one cable interface: Insert a phone cable connected with a telephone to realize the
voice service.
Note:
The gateway supports CLIR (Calling Line Identification Restriction) function.
If you don't want the other side to see your phone number when making a call, you
can call the number "#31#" to activate this function;
If you want to cancel this function, please call the
2
Fast blinking in red: SIM card faults (SIM card does not exist or
the PIN code is not verified)
Steady on and in red: signal strength in level one (weak)
Steady on and in yellow: signal strength in level two or three
(middle)
Steady on and in green: signal strength in level four or fiv
(strong)
Double blinking in green: searching the network
Blinking in green: regi
Steady on and in green: GPRS/
Fast blinking in gr
Blinking in blue: registering with the 3G ne
Steady on and in blue: WCDMA data servic
Steady on and in cyan: HSDPA data service connected
Note: When the gateway is initialized, it is steady on and in
green for three seconds.
Press and hold it to power on or off the E960
Indicator
stering with the 2G network
EDGE data service connected
een: Dow nloading the upgrade mode
Button
twork
e connected
number "*31#" to deactivate it.
e